Connecting ipad on USB-2 port causes reboot and no connection to ICA4+
Hi,I've connected PC on my ICA4+ USB-1 and an iPad Air 2 on the USB-2 port, which worked flawless last year or so.Until this event:Both PC and iPad were connected when I did a "Reset to factory...
View ArticleMidi inputs and outputs problem with 1.0.9
I upgraded the firmware to 1.0.9 successfully.I stumbled upon a problem: at the midi info page all the inputs and outputs are blank. Changing inputs/outputs to on doesnt really do anything, in fact it...
View ArticleiConnectAudio4+ as stand alone mixer
Question about the iConnectAudio4+ audio mixing limitations. Looking over the docs it states that each destination can only have one source. So I just want to be clear... Does that mean there is no way...
View ArticleAnyone using Audio4+ with iOS GarageBand?
Just got an Audio4+ and can't seem to get GarageBand to record audio using front input. I can see an input signal in the audio mixer, but I don't see/hear that signal in the headphone outs. Have I...
View ArticleAudio glitches with iConnectAUDIO4+ and Macbook Pro
Hi there, I am having problems when listening to music from iConnectAUDIO4+ (iTunes, Vlc etc). After a while and especially when I am running other application at the same time the audio comes out...
View ArticleEthernet without computer
Can the Ethernet ports be used without a computer? Say between an ipad connected to the router via wifi and the midi 4 + connected to the router via cable
View ArticleClik here to view.
Manual Firmware Update for iConnectAUDIO4+ | iConnectivity
Manual Firmware Update for iConnectAUDIO4+ | iConnectivity Instructions to manually upgrade your iConnectAUDIO4+ firmware from a standard MIDI file. Read the full story here
View ArticleUsing A4+ With GarageBand: distortion resolved
Wanted to post this new so it wouldn't get buried in another discussion:I found a conflict between GB and A4+, specifically: Using GB's inter-app recording feature while plugged into the A4+ interface...
View ArticleAUdio4+ MIDI vs mio 10 MIDI
Other than the mio 10 having all the DIN plugs, are there any big differences in the way the mio handles MIDI vs the way the Audio4+ handles MIDI?
View ArticleClik here to view.
Insert an effect with the ICA4+
Hello Nick,I would like to know if you could help me achieving this :I would like to use an input of the ICA4+4, redirected to an output (let's say out 3), with a pedal effect.Then, I'd like to insert...
View Articlesync two iCA4+ boxes
I want to jam with another iConnectivity Audio4+ user. What would be the best way to sync them (for sequencers, loops, etc) ? We both don't use Ableton Live so we can't use Ableton Sync - we use...
View ArticleMIO 10 and SONAR
I am running SONAR 8 under Windows 7 Ultimate. I just got my MIO 10 and have a couple issues I have not figured out. The first of which is when I go to MIDI Devices in SONAR there is no port 1 listed....
View ArticleNo Output From CH3
I already submitted a support ticket, but after reading it takes a while to get a response, I thought I'd see if anyone here could offer some advice. I recently picked up an iCA4+ for integration into...
View ArticleiPad App for Assigning Audio Output Channels?
Does anyone know of an App I can load on an iPad, where I can specify which audio channels I want other apps to output on?In my setup, I use Garage Band to play pads, as well as StompBox for acoustic...
View ArticleUnable to connect to iCA4+ with PC on USB1
I want to update the firmware from 1.0.7 to 1.1.0, and iConfig pops up a note stating to ensure the PC is plugged into USB1 before doing so. Up to this point, I've had an iPad plugged into USB1 and my...
View ArticleDoes IOS 10 fix the bug of names of midi ports on ICA4+ ?
Hello,Old configuration with different usb devices connected was always there with 9.x . Support told me it was a bug from Apple.Does IOS 10 fix this problem now ?I don't want to rush on IOS 10...Is...
View ArticlePresets not loading?
I'm currently working with support in trying to figure out why the input/output check boxes in the MIDI Info tab will not keep their state. We've tried firmware 1.1.0 and 1.1.1 with no luck.The support...
View ArticleNo output after firmware update
I've had some health issues but am now back to work and starting to record again. Started up iConfig and dl'ed the update. The patchbay looked strange but I recorded a song in Auria on my iPad Pro and...
View ArticleResolved: 1A port not responsive to PC or iOS Device, 2A port works - opened...
I opened a ticket with support last week, but it's still open with no response so I thought I would post here. The iConnectAudio4+ is running the 1.1.0 firmware with the latest version of iConfig on...
View ArticleFeature Request: Managing iPad While Connected?
I was just thinking how great it would be if I could connect iTunes to my iPad, with the computer plugged into USB2 and the iPad plugged into USB1. As it stands, I need to disconnect the iConnect...
View Article